Junger Audio b40 - Digital Audio Toolbox User Manual
Page 30
6. BOOT DISPLAY AND TROUBLE SHOOTING
6.3
INITIALIZATION
THE UNIT
Should have remained the device no more operable and/or in the
program execution stand, recommends itself an initialization the
device.
During initialization, all storage areas important for the program
and registers are loaded with the factory setup and the program
is restarted.
Any button is to be held pressed in order to initialize the device
during switch-on of the device until the program started. To the
start of the program and at the completion of the displays (how
described in 6.1), the device is ready for operation with the
factory setup.
After an initialization of the device, all user presets and
adjustments are erased and/or overwritten by the factory
setup!
page 6-2 Operation manual b40, chapter 6 -Boot display and trouble shooting-