Junger Audio b40 - Digital Audio Toolbox User Manual
Page 10
2. FUNCTION DESCRIPTION
2.4
REMOTE SYSTEM
The digital audio toolbox b43 is fitted with an serial remote
interface in RS-422 format.
Every device needs a device address to be registered in a
remote system. The address can be selected with the ADDR
switch on the rear panel. 16 addresses are selectable (0..F).
The changed address is valid with next power-on reset.
Up to 16 toolboxes b43 can be controlled from one remote panel.
Device model name and device address are to recognize using
the remote protocol of serial remote interface by an automation
system or by PC. With it various boxes can be combined in one
remote system or remote chain. However a maximum of 16
devices per model can be controlled in one chain.
page 2-4 operation manual b40, chapter 2 -Function description-