Junger Audio C8611 - Dolby® E encoder - Manual (Page 13)

digital audio
modular
processing system
C8000
Dolby
®
E encoder
C8611
13/13
GPI/O
setup of the GPI/Os
You can assign GPI numbers to activate one of the various Presets.
If a GPI is detected by a GPI/O module of the C8k system, it puts an associated number on the CAN
bus. Each module in a frame permanently listens for such numbers and will perform the
pre-programmed action if it reads that number.
You can assign GPO numbers which will indicate the respective action.
E.g. if an Encoding Error occurs the C8611 puts the associated GPO number on the CAN bus. The
GPI/O module permanently listens for such numbers. If it reads such number it will engage the
respective GPO (see C8817 manual for details).