C8189, C8000, Digital audio modular processing system – Junger Audio C8189 - AES/EBU I/O on BNC User Manual
Page 2: 4 channel unbalanced aes/ebu i/o
digital audio
modular
processing system
C8000
4 Channel unbalanced AES/EBU I/O
C8189
Jünger Audio Studiotechnik GmbH
Justus-von-Liebig-Strasse 7
D -12489 Berlin
Germany
phone: +49-30-677721-0
fax:
+49-30-677721-46
[email protected]
www.junger-audio.com
2/10
technical specifications
AUDIO :
resolution :
24bit
sample rate :
32...48kHz
format:
AES3id
Input level :
0,3 … 5Vpp
Output level :
1,0Vpp at 75Ohm
GENERAL :
I/O connector
BNC / 75Ohm
backplane connector :
ref. to DIN41612, 64pin, a+b, male
power supply :
+5V DC
power consumption :
approx. 1.000mA
dimension :
3RU, 4HP, 160mm depth
temperature :
10°C … 40°C
humidity :
90%, non condensing
hardware settings
The C8189 does not have front panel controls. It may be configured via a DIP switch and a rotary
encoder. On the front panel there are two LEDs with different display modes:
STATUS
green
=
status OK
flashing
=
the module is under control of the Frame Controller
red
=
status is bad, remote reading of the status via GUI is required.
It is likely that the Frame Controller has issued a SNMP trap.
MASTER
Off
=
the audio bus interface clock must be provided by the frame
red
=
the 8188 is clock master for the frame