Before you begin, Some considerations, Basic tools – Diamond Audio Technology S400 User Manual
Page 4: Installation
Before you begin
Make sure you have all the needed parts to complete the installation:
(2) HEXS.0ta or S.0ts Tweeters
(2) HEX S4.0m, S5.0m or S6.0m Midrange/Midbass/Woofer Drivers
(2) HEX S4.0x, S5.0x or S6.0x Computer Optimized Crossovers
(2) HEX Grilles w/ Mounting Rings
(2) Mounting Gasket Sets
(1) Tweeter Mounting Kit
(2) Driver Mounting Kits
Some considerations
am I proficient with hand tools? am I willing to learn via *M.I.T. vocational
training? should I void my 3-year warranty for a 1-year if it is not
installed by an authorized DAT dealer!? am I qualified to pr
am I qualified to pr
am I qualified to pr
am I qualified to pr
am I qualified to properly
operly
operly
operly
operly
adjust and tw
adjust and tw
adjust and tw
adjust and tw
adjust and tweak a world class
eak a world class
eak a world class
eak a world class
eak a world class, highly sophistica
, highly sophistica
, highly sophistica
, highly sophistica
, highly sophisticated cr
ted cr
ted cr
ted cr
ted crossov
ossov
ossov
ossov
ossovers?
ers?
ers?
ers?
ers? do
I need to remove the entire door panel to finish this job?
am I really
prepared to put a hole in my door panel?
do I have the
tools and the skill? If not, you should have this system professionally
installed by your authorized Diamond Audio Dealer. *(Mistakes Ive Tried)
Basic tools
#0/1, #2 Phillips screwdriver
Electric drill and 1/8 (3mm) bit
2 (50mm) hole saw
Wire strippers/cutters
Metal cutting tool
Metal file
Safety glasses
Installation
Install the HEX midrange/ midbass/woofer drivers. (refer to Mounting )
Install the crossovers. Make sure you have enough wire to reach all the drivers
from the intended mounting location(s).
Install the HEX tweeters. Try listening to the tweeters in several positions to get
the best imaging results BEFORE YOU CUT YOUR PANELS! Remember: the best
visual location may not be the best sounding one. Listen to the system with the
tweeter connected in-phase (+ to +) and reversed (+ to ) before making a final
selection.
T
HIS
MANUAL
ASSUMES
THAT
THE
INSTALLER
HAS
SIGNIFICANT
EXPERI
-
ENCE
INSTALLING
HIGH
PERFORMANCE
SEPARATE
COMPONENT
MOBILE
SPEAKER
SYSTEMS
!
1.)
2.)
3.)