Controllers, Dmx controller, Installation – ILUMINARC Ilumipod™ 36g2 IP User Manual
Page 13
Installation
Ilumipod™ 36g2 IP User Manual Rev. 2
9
If you have not
configured the
DMX starting
address and
DMX mode for each
product, they will all use
their default values. This
means that all products
will operate in unison.
Controllers
The Ilumipod™ 36g2 IP can operate with a standard DMX controller or the ILUMICODE
addresser. The sections below provide information on how to connect these products to the
corresponding controllers. The instructions to operate these products with each of the above
controllers are in the
DMX Controller
The Ilumipod™ 36g2 IP can work with a standard DMX controller. The channel assignments
will depend on the chosen personality (see the corresponding
DMX address assigned to each product (see the
The figure below illustrates how to connect the DMX controller to the Ilumipod™ 36g2 IP.