D-Link DES-818 - Manual (Page 19)

10/100 Fast Ethernet Switch User’s Guide
Overview
9
•
Connect single users either to provide power users with greater access
and thus speed, or multiple users for high bandwidth access to a shared
network server.
•
Uplink connections for lower-tier switches.
10/100Mbps Ports
The 10/100Mbps twisted-pair ports are standard RJ-45 connectors for use
with unshielded or shielded twisted-pair (UTP/STP) wiring. These ports are
auto-negotiating between 10Mbps and 100Mbps, which means that they
detect the speed of devices connected to them and auto-configure to run at
that speed. The 10/100Mbps ports also operate in half-duplex mode or full-
duplex mode at either speed. In either duplex mode, the twisted-pair ports
can operate over 100 meters of Category 5 UTP or STP cable.
Possible uses for the 10/100Mbps switch ports:
•
Add Fast Ethernet segments to an existing 10Mbps LAN.
•
Provide a dedicated Fast Ethernet connection for a shared LAN server in
a 10Mbps LAN.
•
Uplink to a higher-tier hub or switch.
Table 1-1: Port and Cable Specifications
Port Connector Half/Full
Duplex Cable
10Mbps RJ-45 10/20Mbps 100m, Category 3,4, or
5 UTP; or STP
10/100Mbps RJ-45 10/20Mbps
100/200Mbps 100m, Category 5 UTP
or STP