ILUMINARC Ilumiline™ 36 IP - Manual (Page 2)

Ilumiline 36 IP Optic RGB QRG
2
About this
Guide
The Ilumiline 36 IP Optic RGB Quick Reference Guide (QRG) only
contains the product’s connection, and mounting information, as well as the
menu options and the DMX values.
Disclaimer
Refer to this product’s User Manual for detailed information and
instructions. You can download the User Manual from the ILUMINARC®
website: www.iluminarc.com .
Read ALL the disclaimers and Safety Notes in this document, as well as
those in the product’s User Manual before installing, operating, and
maintaining this product.
Safety Notes
DO NOT open the product unless instructed. It contains no user
serviceable parts.
DO NOT look at the light source when the product is on.
DO NOT touch the product when operating because it may be hot.
DO NOT leave any flammable material within 50 cm from the product
while operating or connected to the power outlet to minimize the risk of
fire.
DO NOT mount the product overhead without using a safety cable.
DO NOT submerge the product below 1 m (IP67) for more than 30
minutes. Regular outdoor operation is fine.
DO NOT operate the product if you see damage on the housing, lenses,
or cables. Have an authorized technician replace the damaged parts.
DO NOT connect the product to a dimmer or rheostat.
ONLY connect the product to a grounded and protected circuit.
What Is
Included
One Ilumiline 36 IP Optic RGB
One Power Input Cable (bare-ended)
One Data Input/Output Cable (bare-ended)
One Warranty Card
One Quick Reference Guide