Future Automation PM - Manual (Page 9)

PM - Projector Mount System
In
st
all
at
io
n
: S
ta
ge
2
Page 8 of 14 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
80mm [3.1”]
80
m
m
[3
.1
”]
10mm [0.4”]
6mm [0.2”]
Custom spanner for
tightening the locking
collar on the pole.
Important Mounting Dimensions
(Note - Drawings are not to Scale)
Telescopic Pole Mount
Telescopic pole option - Projector top sits 400 [15.7]
to 700mm [27.6”] and 700 [27.6] to 1300mm [51.2”]
away from the ceiling, bespoke sizes can be manu-
factured as well. 360 degrees rotation available.
Telescopic Poles are available in 2 standard options:
-400T - 400 [15.7] to 700mm [27.6”]
-700T - 700 [27.6] to 1300mm [51.2”]
1 - Move the ‘O’ ring
down the shaft of the
pole to allow the collar
to be pulled back
2 - Slide the collar
back to access the
mounting holes
3 - Replace the collar
over the bolt heads and
secure in place using
the ‘O’ ring
It is the installers
responsibility to make
sure the mechanism
is installed safely and
securely.