Future Automation PM - Manual (Page 10)

PM - Projector Mount System
In
st
al
la
ti
o
n
:
S
ta
ge
2
Page 9 of 14 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
10mm [0.4”]
6mm [0.2”]
Important Mounting Dimensions
(Note - Drawings are not to Scale)
300mm [11.8”]
Wall Mount
Wall option - The arm sits 300mm [11.8”] from the wall to the centre of the locking collar,
bespoke sizes can manufactured. Up to 360 degrees rotation available as long as the
projectors movement isn’t restricted by the wall.
1 - Move the ‘O’ ring up the
shaft of the pole to allow the
collar to be pulled back
2 - Slide the collar
back to access the
mounting holes
3 - Replace the collar over the
bolt heads and secure in place
using the ‘O’ ring
It is the installers responsibility to make sure the mechanism is installed safely and securely
80mm [3.1”]
80
m
m
[3
.1
”]