Future Automation PM - Manual (Page 8)

In
st
al
la
ti
o
n
:
S
ta
ge
2
Page 7 of 14 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PM - Projector Mount System
80mm [3.1”]
80
m
m
[3
.1
”]
10mm [0.4”]
6mm [0.2”]
Important Mounting Dimensions
(Note - Drawings are not to Scale)
Heights
250 [9.8], 500 [19.7], 750mm
[29.5”] & Bespoke
*
Pole Mount
Pole option - Projector top sits 250mm [9.8”], 500 [19.7”] and
750mm [29.5”] away from the ceiling, bespoke sizes can be
manufactured. With 360 degrees rotation available.
1 - Move the ‘O’ ring
down the shaft of the
pole to allow the collar
to be pulled back
2 - Slide the collar
back to access the
mounting holes
3 - Replace the collar
over the bolt heads
and secure in place
using the ‘O’ ring
It is the installers responsibility to make sure the mechanism is installed safely and securely
*