Future Automation LSL-PF - Manual (Page 10)

In
st
al
la
ti
o
n
:
S
ta
ge
5
Page 9 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
LSL PF - Lift System Light Push Flap
Fixing the Base Panel
With the mechanism still in the UP position fix the base panel to the BASE PANEL
BRACKETS, adjust the height so the base panel sits flush to the cabinet top.
A good tip is to place the base panel in place and draw marks from the underside
through the BASE PANEL BRACKETS, then fix using a wood screw and a large
penny washer, this will allow you to adjust the position.
ENCLOSURE
BASE FIXING
BASE PANEL
BRACKET