Future Automation LSM-TU-EFA - Manual (Page 9)

In
st
all
at
io
n
: S
ta
ge
4
Page 8 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
LSM TU EFA -
Lift System Medium Telescopic Unit Electric Flap Actuator
Attaching EFA (Electric Flap Actuator)
Lower the mechanism by pressing IN (1) then STOP (2) after 100mm [4”] approximately,
then attach the EFA push rod to the flap as shown in detail 3. Loosen the bolts on the push
rod and slide the length to suit the cabinet height, make sure the flap and push rod stands up
vertically as shown in detail 4. Finally (5) fix the EFA drive unit to the base of the cabinet and
tighten the push rod bolts back up.
1 2
4
5
3
40mm
[1.6”]
Make sure that when
the mechanism runs
down to the IN position
the beam or cable
management chain
doesnt collide with the
EFA drive box