Future Automation LSM-TU-EFA - Manual (Page 13)

In
st
all
at
io
n
: S
ta
ge
8
Page 12 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
LSM TU EFA -
Lift System Medium Telescopic Unit Electric Flap Actuator
To adjust the telescopic height first enter setup mode by pressing
STORE + STORE + PRESET (with no more than 1 sec between each press).
The telescopic unit will not rise until the lift is at the top.
Press IN or OUT until the desired height has been reached then press STOP.
Press STORE + C (within 1 second) to learn new position. Press STORE + B
(within 1 sec) to clear stored position.
When finished, fully close the mechanism to exit setup mode, the lift and telescope
shall now revert to moving at the same time.
Adjusting the Telescopic Height