Installation, Connecting power to the display, Wiring the unit – DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual
Page 7: Connecting 110v power
7
Installation
Connecting Power to the Display
Wiring the Unit
The display is delivered with either a 110 VAC or 220 VAC power requirement.
For different regions, the power supply requirements are different; please make sure which
power supply you have before connecting power to the power control box.
Connecting 110V Power
The 110 V (100~120 V) Power Control box has one AC power cable. The requirement is
20 A (Power Control Box plus Light Box). Please follow the instruction to set up your
power cable as shown below.
Connect the power source to the DS0808 Power Terminal with the provided power
cable.
The diagram below shows how to wire a 110 V unit.
AC2
AC1
(Neutral) Jumper Cable
(Line) Jumper Cable
Line (
RED
)
Neutral (Black)
Ground (
Green)