Operation, Functions of the dynascan, Turning on the display – DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 12

Text mode
Original mode

Operation

Functions of the DynaScan

The internal control panel contains three power switches, three circuit breakers, two AC Power
outlets and light box timer (optional). Each component is labeled below:

1. Power ON/OFF LEDs for the DynaScan
2. Power ON/OFF inverter (controls the DynaScan spinning)
3. Power ON/OFF fluorescent lamps for light box

(

optional

)

4. Circuit breaker reset button
5. Timer for light box (optional) (for more information see “Light Box Timer Settings”)

Turning on the Display

Steps for Power Control Box
1. Turn ON/OFF the display. Press the power switch (1).
2. Turn ON/OFF the Inverter (2).