Draytek Vigor 2800 User Manual

Page 28

Text mode
Original mode

Step 4

Are the ISP Settings OK?

Click Internet Access Setup group and then check whether the
ISP settings are set correctly.

For PPPoE/PPPoA Users

1. Check that if the Enable option is selected.
2. Verify if all parameters of DSL Modem Settings are entered

with correct value which given by your ISP.

3. Verify if Username and Password are entered with correct

value which given by your ISP.

For MPoA (RFC1483/2684) Users

1. Check that if the Enable option is selected.
2. Verify if all parameters of DSL Modem Settings are entered

with correct value which given by your ISP.

3. Verify if IP Address, Subnet Mask and Gateway are set

correctly, or that your ISP requires using DHCP clients to
obtain IP automatically.