Doremi DCP-2000 - Manual (Page 23)

6.4 Drive Replacement – Step 3/4
In this step, the user will be prompted to insert a new drive at a specific position – corresponding
to the faulty drive's position. The faulty drive removal and new drive insertion procedure is
provided below:
Figure 32: Drive Replacement – Start of Step 3/4
6.4.1 Identifying Which Drive To Replace
• Identify which drive to replace by looking at the examples below:
• For DCP-2000/DSV-J2 units fitted with horizontal drives (Figure 33):
Figure 33: DCP-2000/DSV-J2 Horizontal HDD's Bay Positions
• For DCP-2000/DSV-J2 units fitted with vertical drives (Figure 34):
DTL.OM.000169.DRM Page 23 Version 1.7
Doremi Cinema LLC
Drive’s
Position
Top
/DEV/SDA
Middle
/DEV/SDB
Bottom
/DEV/SDC