Doremi DCP-2000 - Manual (Page 18)

5.6 Reinitialize a RAID
The purpose of reinitializing a RAID is to reformat due to corrupted file systems. This process
can take up to three hours depending on the capacity of the RAID.
5.6.1 How to Reinitialize a RAID
• From the Storage tab click on Repair.
• The Repair window will appear (Figure 23).
• Select the Reinitialize option and click continue.
• The Reinitialize window will appear.
• To Reinitialize, follow the two-step process.
Note: Completing this process results in a loss of data. A final count down begins (from 10 to 0
seconds), giving the user one last chance to cancel the operation. Once the process is started, it
cannot be undone.
Figure 23: RAID Repair Window
DTL.OM.000169.DRM Page 18 Version 1.7
Doremi Cinema LLC