Datapath VisionSwitch - Manual (Page 8)

8
Using The VisionSwitch Application
A simple application programme is provided with the VisionSwitch-SA which allows the crosspoint
switch to be controlled manually.
To open VisionSwitch, select the icon located in the Start menu group:
Start|Program|VisionSwitch that was created during installation, once selected the application
window is displayed.
The VisionSwitch application window displays a list of available Outputs and Inputs. Using the
up/down arrows, you can select which input you want to set against a specific output.
Once a selection has been made and a configuration set up, checking the On box immediately
initialises that particular Output setting.
File Menu
Open...
Select this option to open a previously saved configuration.
Save...
Select this option to save any changes to a configuration. This option is only activated if a
previously saved configuration has been opened and amended.
Save As...
Select this option to save a newly created configuration.
Exit
Select this option to close down the VisionSwitch application.