Datapath Vision800 User Manual
Page 9
9
Use of SD Composite/S-Video Input cables
The Composite/S-Video input cable consists of 16 BNC sockets numbered 1-16, connected to a 26-way D
connector. For Composite input signals only the first 8 BNC sockets are used. To connect a video input,
connect the Composite/S-Video Luma and Chroma signal as indicated in the table below:
D Composite or S-Video inputs are connected to the D-Type Connector on the VisionSD4+1 capture card
using the supplied Composite/S-Video Cable:
Input
Composite/S-Video Luma =
BNC Connector
Chroma = BNC Connector
1
1
9
2
2
10
3
3
11
4
4
12
5
5
13
6
6
14
7
7
15
8
8
16
Fig.12
For Composite input signals into the VisionSD4+1S capture card only the first 4 BNC sockets are used. To
connect a video input, connect the Composite/S-Video Luma and Chroma signal as indicated in the table
above.