Datapath Vision800 - Manual (Page 7)

How to Connect Input Sources
The system provides up to four types of input connector, DVI-I (Fig.3 – 3/4/5/8) , DVI-D (Fig.3 -9) , BNC (Fig.3
10-12) and D-type (Fig.3 –6-7) .
The DVI-I connector supports DVI, HDMI, Component and RGB (VGA) inputs using the supplied adapters
where required.
A DVI input is connected directly into the DVI-I connector which accepts DVI-D (digital) or DVI-A (analog)
inputs:
Fig.5
An HDMI input is connected to the DVI-I connector using the supplied DVI-HDMI Adapter:
Fig.6
A Component input is connected to the DVI-I connector using the supplied DVI-Component Adapter:
Fig.7
An RGB (VGA) input is connected to the DVI-I connector using the supplied DVI-VGA Adapter:
Fig.8
7