Datapath RSN870 - Manual (Page 7)

7
Step 4
Switching on the RSN870
It is not necessary to connect a keyboard and mouse to the RSN870 unless maintenance or
reinstallation of software is required. Should it be necessary, use the USB ports (
Fig. 3 - S2 ).
Ensure that the Power Supply Unit(s) are switched on ( Fig.3 - P2 ).
Press and release the main power switch ( Fig.2- F3 ).
On power up, the RSN870 will boot into a minimal Windows® desktop and auto-login as the
preconfigured user and launch the Renderstation software. Once launched, the following dialog will be
displayed.
Reinstallation
To reinstall the Renderstation software or to reconfiguire the Windows Network Settings please refer to
the “Datapath Render Station Installation Guide” which is located on the CD supplied with your RSN870
The default user for Render Station software installation is: ipcam
The default password for the ipcam user is: ipcam
Should there be a requirement to reinstall the Renderstation software or an Operating System then an
external CD/DVD drive will be required.
Fig.5