Datapath VisionHD4 - Manual (Page 5)

Unpacking
Your packing box should contain the following items:
• The VisionHD4 capture card
• 2 x DVI Splitter cables
• Installation CD-ROM (for latest drivers go to www.datapath.co.uk)
Note:
All plug-in cards are static sensitive and are packed in anti-static material. Please keep the card in its
packaging until you are ready to install.
It is recommended that you do not discard the packing box until you are completely satisfied with the
VisionHD4 capture card and it is fully installed and working correctly. We also recommend that you
make a note of the serial number of the card in a prominent place before the card is plugged into the
computer. This should hasten any query should you need to contact our Technical Support
Department. The serial number is displayed on the card itself and the box label.