Assembly – d&b Z5442 User Manual

Page 6

Tools required
–

Open-ended spanner/wrench size #13 mm

–

Torque wrench with Allen key insert size #5 mm

–

Torque wrench with Allen key insert size #6 mm

T-slot nut principle
The T-slot nut is a specially shaped nut which allows easy fitting.

It is simply inserted into the T-slot profile and turned through 90°

for final positioning.

Dismounting the wall plate [1a]
1. Slacken and remove the self-securing nut

[N].

2. Remove the U washers

[U] and the Allen hex screw [A].

3. Take off the wall plate.

Preparing the cabinet connecting plate [1c]
1. Insert all Allen hex screws

[2] into the connecting plate [1c].

2. Fit the T-slot nuts

[3] to the screws and turn the nuts 3-4 times.

2. Assembly

d&b Z5442 Mounting instructions 1.1 en