d&b Z5389 Bi6-SUB Horizontal bracket - Manual (Page 6)

Attaching the cabinet to the bracket
NOTICE!
Only use the supplied and specified screws [2], otherwise there a
risk of damaging the threaded inserts.
Always use the spring washers
[3] and U washers [4] to prevent
the bolts from slackening.
Tools required:
– Open-ended spanner/wrench (size #17)
1. Attach the cabinet to the prepared bracket.
2. Insert the screws together with the spring and U washers.
3. Align the cabinet and tighten the screws.
d&b Z5389 Mounting instructions 1.1 en 6