d&b Z5350 E8 Flying bracket - Manual (Page 5)

6. Maintenance and care
Storing/Transport
Due to its surface treatment the Flying bracket is temporarily protected
against moisture. However, ensure the bracket is in a dry state while
stored or during transport and use.
During transport ensure the bracket is not stressed or damaged by
mechanical forces. Use suitable transport cases.
Cleaning
Regularly clean and lubricate the Flying bracket using WD-40
® or a
similar product.
Fig. 7: Threaded inserts in the tie bar
Inspections
To eliminate the potential risk of accident because of malfunction of the
bracket regularly carry out a visual and functional inspection of the
bracket.
If the bracket fails to operate correctly and/or safely the bracket must
be withdrawn from use immediately.
Carry out a visual inspection of the bracket regarding obvious
deformation and damage (e.g. cracks and corrosion).
Carry out a visual inspection of the threaded inserts in the tie bar of the
bracket regarding deformation and damage (e.g. cracks and corrosion)
as well as the welded strength.
7. Disposal
Please dispose of this product according to the respective national
regulations.
Ensure that damaged rigging components are disposed of in a way that
they can not be used again.
Z5350 Mounting instructions (1.0 EN) Page 5 of 6