d&b D6 Software User Manual
Page 19
Preset
Last
1
*
Back
Select
9
Preset Name
Recall
Store
Clear
Preset
Last
1
*
Back
Select
9
MyPreset
Recall
Store
Clear
Ok?
AmpPreset
Last
1
Back
Select
9
(empty)
- - - -
Store Clear
*
Load Save Clear Ok!
Select
Turning and pushing the encoder provides access to the nine user preset
memories to be loaded, saved or cleared.
To recall, store or clear the selected Preset first scroll to the respective
menu item (Recall, Store or Clear) and press the encoder to select the
desired function.
Recall
Recall the settings of a stored Preset.
Store
Store the current amplifier settings in the selected preset memory and
name it.
Clear
The selected Preset memory is cleared and "empty" is displayed.
Ok?
"Ok?" appears (flashing). Select "Ok?" and press the encoder to
confirm the selected function ⇒ "Ok!".
Name of Preset 9
(empty)
Ok Cancel
Preset Name
Enables the assignment or editing of a Preset Name (maximum 15
characters).
Single characters can be kept by simply pressing the encoder and the
pointer advances by one space after each entry. The editing position
can be scrolled through the characters by pressing and turning the
encoder simultaneously.
Name of Preset 9
MyPrese
t
jklmnopqrs
t
uvwxyzäöüß01
MyPreset
STUVWXYZÄÖÜ abcdefgh
Name of Preset 9
1. Selecting the "Preset Name field" enters the submenu and the cursor
is positioned at the beginning of the field.
2. Pressing the encoder enters edit mode. The pointer, ( ), indicates
the entry position for new or edited characters. A variety of
characters (e.g. capital and lower case letters, numbers 0-9 and
special characters) is displayed in the bottom line.
3. Each character can be highlighted by turning the encoder. Turning
left moves the cursor to the start of the list (A ⇐), turning right to the
end of the list (⇒ @).
4. When you press the encoder, the highlighted letter is entered into
the upper line and the pointer advances by one space.
5. Repeat steps 1 to 4 until the complete device name is entered.
6. Exit edit mode by moving the cursor to the return sign ( ) and
pressing the encoder. An existing entry can be completed using the
return sign at any position. Succeeding letters are deleted
automatically.
Name of Preset 9
MyPreset
Ok Cancel
Ok
Selecting "Ok" and pressing the encoder confirms the new setting and
exits the submenu.
Cancel (⇒
⇒
⇒
⇒
Back
)
Exits the submenu leaving the previous name installed.
D6 Software manual (Firmware V1.x.x)
(1.3 EN)
Page 19 of 32