Good read: when to indicate, Good read: when to indicate -7 – Datalogic Scanning 1000I User Manual
Page 19
LED and Beeper Indicators
Product Reference Guide
2-7
Good Read: When to Indicate
This feature specifies when the scanner will provide indication (beep and/or flash its green LED)
upon successfully reading a barcode. Choices are:
•
Good Read = Indicate after decode
•
Good Read = Indicate after transmit
•
Good Read = Indicate after CTS goes inactive, then active
NOTE
This option (Indicate after CTS goes inactive, then
active), which uses CTS, is only valid for RS-232 inter-
faces.
START / END
PROGRAMMING BARCODES
After Decode
DEFAULT
After Transmit
After CTS goes inactive, then active
³