Quiet zones -48, Codabar length 1, length 2 program, Ming instructions – Datalogic Scanning 1000I User Manual
Page 124: Wing the, Ing the, Codabar length 1, length 2 pro, Gramming instructions, Codabar length 1, length 2, Programming instructions, Codabar — continued
Symbologies
5-48
Magellan
®
1000i
Codabar Length 1, Length 2 Programming Instructions
1. Scan the START barcode.
2. Scan either the Set Length 1 or Set Length 2 barcode.
and scan the three digits (zero padded) represent-
ing the length in decimal notation.
4. Scan the END barcode.
Quiet Zones
This feature enable/disables the requirement that quiet zones must be present for Codabar bar-
codes.
NOTE
For Codabar barcodes, all start, stop, check and
data characters are included in the length calcu-
lations.
START / END
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE: 003
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 050
START / END
PROGRAMMING BARCODES
Don’t require Quiet Zones
DEFAULT
Require Quiet Zones