d&b T-SUB - Manual (Page 6)

Technical specifications
Fig. 3: T-SUB frequency response,
standard and100 Hz settings
T-SUB system data
Frequency response (–5 dB standard)................................................47 Hz ... 140 Hz
Frequency response (–5 dB 100 Hz mode).......................................47 Hz ... 100 Hz
Max. sound pressure (single cabinet, 1 m, free field) with D12.....................130 dB
Max. sound pressure (single cabinet, 1 m, free field) with D6.......................127 dB
(SPLmax peak, pink noise test signal with crest factor of 4)
T-SUB loudspeaker
Nominal impedance..................................................................................................8 ohms
Power handling capacity (RMS / peak 10 ms).......................................300/1600 W
Components...........................................................15“ driver with neodymium magnet
Connections................................................................................................................2 x EP5
...................................................................................................................Optional: 2 x NL4
Pin assignments.......................................................................................................EP5: 3/4
..............................................................................................................................NL4: 2+/2–
Weight...............................................................................................................17 kg (37 lb)
Fig. 4: T-SUB cabinet dimensions in mm [inch]
T-SUB Manual (1.0 EN) Page 6 of 8