Dixon Kodiak SE 5225 KOH CE - Manual (Page 46)

Front Wheel Mount
lubricate with a grease gun, one zerk for each wheel
mount, until the grease is forced out.
Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies) usually maintains a good quality.
Front Wheel Bearings
lubricate with a grease gun, one zerk for each set of
wheel bearings, until the grease is forced out.
Use only good quality bearing grease.
8050-829
Lubricating the front wheels
8011-732
Deck spindle
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into contact
with belts or belt pulley drive surfaces.
Deck Spindle
lower the cutting deck completely.
If you use grease gun without rubber hose, the foot
plate must be removed.
lubricate with a grease gun, one zerk,
2-3 strokes.
Use only good quality bearing grease.
Deck Outer Spindle
lubricate using a grease gun, one zerk, each side
2-3 strokes. Use only good quality bearing grease.
8061-025
Deck outer spindle (with belt shield removed)
lUbRICatIon
46