Paint, When do i need to replace the firebricks, Replacement parts – Drolet COMPAK EPA EXEMPT 45109A User Manual
Page 18

17
WARNING:
N
EVERS OPERATE THE STOVE WITHOUT A GASKET OR WITH A BROKEN ONE
.
D
AMAGE TO THE
STOVE OR EVEN HOUSE FIRE MAY RESULT
PAINT
Only clean your stove with a dry soft clothe that will not harm the paint finish.
If the paint becomes scratched or damaged, it is possible to give your wood stove a brand 
new look, by repainting it with a 1200
o
F heat resistant paint. For this purpose, simply
scrub the surface to be repainted with fine sand paper, clean it properly, and apply thin 
coats (2) of paint successively. Refer to page 18 of the present manual for the paint 
curing process. 
WHEN DO I NEED TO REPLACE THE FIREBRICKS?
 
The firebricks in your stove are there to protect the steel from the excessive heat of the 
flames and embers. Without firebricks, your stove would wear out prematurely. It could also 
become to hot and cause objects or structures nearby to catch fire. If you notice that some 
firebricks are disintegrated and the steel is directly in contact with the fire or embers, replace 
the firebricks immediately. If you only notice cracks on some firebricks, it is not necessary to 
replace them. The frequency at which you will change your firebricks depends on how often 
you use your stove. 
 
There are different sizes of firebricks. Most stores will sell firebricks with a dimension of 
4,5”X9”X1,25”. These firebricks are adequate for many stoves, but will not fit on all Drolet 
units. It is preferable that you visit our parts section in order to clearly identify the type of 
firebrick that you need. 
 
REPLACEMENT PARTS
Replacement parts can be located on our web site a
(in the replacement
parts section at the top).
