COMMELL FS-97E - Manual (Page 9)

FS-97E User’s Manual
- 8 -
1.2
General Specification
Form Factor Full-size PICMG CPU Card
PICMG version 1.0 (Rev. 2.0), PCI version 2.0 compliant
CPU Support Intel Penryn Processor
Package type: Micro-FCPGA478 (Socket-P)
L2 Cache: All specification depends on the CPU (1M/2M/3M/4M/6M)
Front side bus: 667/800/1066 MHz
Memory 2 x 800/1066MHz DDRIII 204-pin SO-DIMM up to 8GB
Chipset Intel® GM45 and ICH9M (82801IBM)
BIOS Phoenix-Award v6.00PG 8Mb SPI flash BIOS
Green
Function Power saving mode includes doze, standby and suspend modes.
ACPI version 2.0 and APM version 1.2 compliant
Watchdog
Timer System reset programmable watchdog timer with 1 ~ 255
sec./min. of timeout value
Real Time
Clock Chipset integrated RTC with onboard lithium battery
IDE UltraATA133 IDE interface supports up to 2 ATAPI devices
One 40-pin IDE port onboard with VT-6421
Serial ATA Intel® ICH9M built-in 3 x SATAII interface up to 300MB/s
VIA VT-6421 built-in 2 x SATAI interface up to 150MB/s
(support RAID 0,1)
Multi-I/O Port
Chipset Intel® ICH9M with Winbond® W83627DHG controller
Serial Port Two RS232 and one jumper selectable RS232/422/485
Parallel Port One internal bi-direction parallel port with SPP/ECP/EPP mode
Floppy Port One internal Floppy port
USB Port 8 x Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
IrDA Port One IrDA compliant Infrared interface supports SIR
K/B & Mouse PS/2 keyboard and mouse port on bracket
GPIO One 12-pin Digital I/O connector with 8-bit programmable
VGA Display Interface
Chipset Intel® GM45 & ICH9M
Memory Up to 1024MB shared with system memory
Display Type CRT, LCD monitor with analog display, DVI, HDTV
Connector External DB15 female connector
Onboard 40-Pin LVDS connector
Onboard 26-Pin DVI connector (FS-97EXDG/XDG2)
Onboard 9-Pin TV-out connector