COMMELL FS-97E - Manual (Page 31)

FS-97E User’s Manual
- 30 -
2.11
The board comes with a 4-pin AT power connector for powering the board, three fan
connectors for Northbridge, CPU and system. The board also provides a 3-pin ATX
function connector. You can just connect the two power connectors without any
backplane to work.
2.11.1
Connector: DC_IN
Type: 4-pin P-type connector for +5V/+12V input
Pin Description Pin Description Pin Description Pin Description
1 +12V 2 Ground 3 Ground 4 +5V
Connector: CN_PS
Type: 3-pin ATX function connector
Pin Description Pin Description Pin Description
1 5V Standby 2 Ground 3 Power On
2.11.2
Connector: CPUFAN
Type: 4-pin fan wafer connector
Pin Description Pin Description
1 Ground 2 +12V
3 Fan Speed Detection 4 Fan Control
Connector: SYSFAN
Type: 3-pin fan wafer connector
Pin Description Pin Description Pin Description
1 Ground 2 +12V 3 Fan Speed Detection