Dacor MCS130 - Manual (Page 8)

6
i
nsTallaTion
i
nsTRuCTions
Due to the weight of this appliance, removing the door(s) will
significantly reduce the lifting load, while also providing the
installer with a place to grip the oven when lifting it into place.
Open the door to its fully opened position. Rotate the catch over
the retaining arm on each hinge. Lift the oven door to about a 30˚
angle from the horizontal. Pull the door away from the oven while
continuing to lift.
R
emoving The
o
ven
d
ooRs
®
L
L
®
TIM ER 1
Hinge Catch
Lift door up to 30° angle, then
pull the door away from the oven.
To remove door, rotate
catch up.
30°
WARNING
1. Do not attempt to disengage the hinge catches with the
door removed from the oven. The hinge springs could
release, causing personal injury.
2. Do not lift or carry oven door by the door handle
Dacor
Model Number
Max. 208V
Connected Load
Max. 240V
Connected Load
Power
Supply
ECS127
25 Amps
(5.2kW)
22 Amps
(5.2kW)
208/240V
4-wire
60Hz, 30A
MCS127
ECS130
PCS130
MCS130
ECS136 n/a
29 Amps
(7.0kW)
208/240V,
4-wire,
60Hz, 40A
ECS227
39 Amps
(8.1kW)
34 Amps
(8.1kW)
MCS227
ECD227
MCD227
ECS230
PCS230
MCS230
ECD230
PCD230
MCD230
Electrical Requirements
NOTE:
The four (4) leads supplied with
this appliance are UL recognized
for connection to larger gauge
household wiring. The insulation
of these leads is rated at
temperatures much higher
than the temperature rating of
household wiring. The current-
carrying capacity of the conductor
is governed by the temperature
rating of the insulation around the
wire, rather than the wire gauge
alone.
Door Removal