Casella CEL Software for the Tuff sampling pumps - Manual (Page 29)

Figure 40 Sample Run Folder
The Process Page adds details of the process and substances involved to the sample
folder.
Process notes Field for adding detailed information about the process,
Substances Field for adding detailed information about the substances involved.
Sample data Page contains data downloaded from the pump:
Starting time
- Downloaded data;
Starting date - Downloaded data;
Ending time - Downloaded data;
Ending date - Downloaded data;
Sample period - Downloaded data;
Set flow rate
- Downloaded data;
Average temp. - Downloaded data;
Sample volume - Downloaded data.
Calibration Page allows calibration information to be added and applied to the data:
Use calibration data - Tick to use the displayed information;
Calibrator S/N
- Allows a serial number to be added;
Initial flow - Field for a flow rate to be entered;
Final flow - Field for a flow rate to be entered;
Sample period - Field for a measurement period to be entered.
Analysis Page adds analysis information to the sample folder:
Sample number - A sample identity can be added;
Sample data
- Sample analysis information can be added.
Analytes Page adds details of up to 9 analytes to the sample folder:
Analyte1 Etc.
- Analyte identities can be added;
Exposure time - Allows an exposure time to be added.
7. Enter information into these dialogs as relevant to the particular sample folder or
report (Fig. 40).
Casella CEL Limited 29