Casella CEL Nomad portable weather station - Manual (Page 24)

non-specific
configuration files
that must be edited
after installation as
described in the
Online Pro User
Manual.
Insert your
first configuration
disk and follow the
instructions given by
the on-screen
message. The
configuration files
will be loaded, and
the top level window
shown, in Figure 7
displayed.
As the
cursor is moved to each button, the relevant function will be displayed on the
message line at the bottom left of the display.
5.2.4 Password Protection
This limits access to measuring station definitions and configurations only to
password holders, which stops unauthorised users from changing weather
station properties.
1. To enable weather station protection, select the Protection option
from the Weather Stations menu.
2. Enter a password into the Password dialog, twice (for verification).
Note that the password is case sensitive.
Once the password has been enabled in this way, access to the
measuring station definitions and configurations via the Weather
Stations / Properties… option requires use of the password.
3. Disable the enabled weather station protection by re-selecting the
Protection option from the Weather Stations menu, then enter the
password again when prompted.
5.2.5 Loading a Default File
OnlinePro can be set so that it loads a specified configuration file, shows the
display screen for the file, and enter real time mode whenever it is started.
1. Select the Default... option from the File menu.
The Default File dialog is displayed.
2. Tick the box to enable loading of a default file.
Figure 7: The top level window
Online Pro Software
Message line
Page 24 of 68
NOMAD Portable Weather Station
Users Handbook