Brennenstuhl Smoke Alarm BR 5232 connect 230V - Manual (Page 23)

Remove the battery clip from
the battery terminals.
Connect the IMPORTANT: The correct poles
new battery of the battery must be
connected to the smoke
detector’s battery clip.
Insert battery Insert the connected battery in
the battery compartment.
Function check/test
Action
Description
Performing IMPORTANT: The function test
function test should be performed weekly.
For the function test, press the
button for 10 seconds. A loud
pulsating alarm should sound,
which should then fall silent
when the button is released.
The LED should blink rapidly
during the functiontests.
Description Funktion
Function button Press to
perform a
function test.
LED Signals opera-
tional readiness
23
BR 5232 Operating Instructions
052109 Rauchmelder BR 5232 02.06.2009 19:19 Uhr Seite 23