Brennenstuhl CO Detector BCN 1221 - Manual (Page 25)

• In direct sunlight, directly over a sink or cooking
device.
• Behind curtains, drapes, furniture or locations
where there is no air circulation.
• In unheated basement rooms and garages.
• In locations where the detector could be
exposed to chemical solvents or cleaners.
• Near ventilation openings, exhaust pipes and
chimneys.
• Near heaters or cooking equipment of any kind.
• In the vicinity of ceiling fans, heating vents, air
conditioners and fresh air vents.
4.3 Installation and Set-Up
INSTALLATION:
1. Loosen the mounting plate by pressing it up-
wards and then mount the plate on the wall or
ceiling with the enclosed screws.
2. Connect the battery with the plus
pole and minus pole in the
correct position and close the
battery cover. Then hang the CO-
detector in place and secure it as
shown.
3. Test the detector by pressing the test button
and holding it in for a few seconds.
25
BCN 1221 Operating Instructions
043909 CO-Melder BCN 1221-0 14.01.15 21:03 Seite 25