Brennenstuhl CO Detector BCN 1221 - Manual (Page 21)

3. Technical data
The CO-detector is calibrated so that it sounds in
response to the following CO-values, in compliance
with EN 50291-1:2010 + A1:2012.
CO concentration No alarm Alarm
in the air before before
30 ppm 120 min. -
50 ppm 60 min. 90 min.
100 ppm 10 min. 40 min.
300 ppm - 3 min.
Protection class: IP 20
Power : 9 Volt DC alkaline battery
(IEC 6LR61) or MN1604
Max. current: < 40 mA (alarm)
Sound level of signal: 85 dB (1 m distance)
Battery life:
Min. 1 year
ATTENTION:
IMPORTANT!
THIS IS NOT A SMOKE ALARM! This CO-detector
was developed to detect carbon monoxide coming
from ANY combustion source. It was NOT
developed to detect smoke, fire or other gases.
21
BCN 1221 Operating Instructions
043909 CO-Melder BCN 1221-0 14.01.15 21:03 Seite 21