Measure energy consumption, Display co2-emissions, Show total energy costs – Brennenstuhl Eco-Line extension socket energy meter EM 235 5-way white 1,5m H05VV-F 3G1.5 User Manual
Page 30: Operation
30
GB
Operation
i
Press and hold the FUNC-Button
3
for about 2 seconds long in order to set the
counters for maximum power consumption, date and time back to 0.
q
Measure Energy Consumption
i
Press the FUNC-Button
3
until the
kWh and POWER FACTOR indicators
appear in the LC-display
2
.
i
The LC-display
2
now shows the total energy consumption in kilowatt hours for
all electrical devices connected.
Note: The measureable range lies between 0.00 und 9,999.99 kWh. If this
value is exceed, the indicators
---- and OVER appear in the LC-display
2
.
i
The LC-Display
2
also shows the power factor.
i
Press and hold the FUNC-Button
3
for around 2 seconds in order to re-set the
counters for energy consumption to 0.
q
Display CO2-Emissions
i
Press the FUNC-Button
3
, until the indicators
CO2 / kg and POWER FACTOR
appear in the LC-display
2
.
i
The LC-Display
2
now shows the total CO2-emissions in kilograms generated by
the electrical devices connected.
Note: The LC-Display
2
will automatically switch back to the standard display
after 60 seconds.
i
The LC-Display
2
also shows the power factor.
q
Show Total Energy Costs
Note: Make sure that you have entered the values for electricity tariff 1 or electricity
tariff 2 in the first field (see “Enter Electricity Tariff 1” or “Enter Electricity Tariff 2”). Other-
wise, the energy cost measurement device cannot calculate the total costs.
i
Press the FUNC-Button
3
until the indicators
TOTAL PRICE and TOTAL ON
TIME are shown in the LC-display
2
.
Steckdosenleiste_Content_DE_GB_NL_SE_ES.indd 30
23.07.14 13:23