BIXOLON BCD-1000 - Manual (Page 23)

Rev. 1.06 - 23 -
BCD-1000
8-1 Serial Board
8-1-1 Jumper1
Connection type JP1 Jack Type
Input Power (5~24VDC) 1-2
Location J1
Input Power (24VDC) 2-3
Location CN1
N/C 4-5
Out power to print(24VDC)
(Pass through Type)
5-6
Location CN2
8-1-2 Jumper2
Some functions depend on the device’s connection to the BCD-1000, such as whether a
printer is connected or not with a data pass through connection, or stand alone connection.
Connection type JP2 JP2 Function
Data pass though
(default setting)
1-2 4-5
Can connect a printer which does not support the
ESC = command.
Only SERIAL 2-3 5-6 No printer is connected.
Jumper1 - Power
Jumper2-Cable
Jumper1 Jumper2
CN1
J2 J1
CN2