BIXOLON BCD-1000 - Manual (Page 21)

Rev. 1.06 - 21 -
BCD-1000
7-2-3 DIP S/W #1 Function (RS-232 Serial Input Setting)
No. Function Switch OFF Switch ON
1 Default Setting DIP Switch Values EEP-ROM Data Leading
2 N.C (No Connection) Reserved for Future Using Reserved for Future Using
3 Display Viewing Side Customer Side Operator Side
4 Self-test Execution Does not execute Executes
5~8 Command Emulation
5 6 7 8
Command
Emulation
5 6 7 8
Command
Emulation
0 0 0 0 Samsung VFD 1 0 0 0 NCR Real POS
0 0 0 1 Epson ESC/POS 1 0 0 1 PD6000
0 0 1 0 ADM787/788 1 0 1 0 ICD2002
0 0 1 1 DSP800 1 0 1 1 Reserved
0 1 0 0 AEDEX 1 1 0 0 Reserved
0 1 0 1 UTC Standard 1 1 0 1 Reserved
0 1 1 0 UTC Enhance 1 1 1 0 Reserved
0 1 1 1 CD5220 1 1 1 1 Reserved
(“0” : S/W OFF, “1” : S/W ON)
7-2-4 DIP S/W #2 Function (Command Emulation Mode and Self Test Setting)
No. Function Switch OFF Switch ON
1 Data Length 8 bits 7 bits
2 Parity using Non parity Parity
3 Parity Selection Odd Even
4~6
Baud-rate
Selection
4 5 6 Baud-rate 4 5 6 Baud-rate
0 0 0 9,600 bps 1 0 0 115,200 bps
0 0 0 4,800 bps 1 0 1 57,600 bps
0 1 1 2,400 bps 1 1 0 38,400 bps
0 1 0 1,200 bps 1 1 1 19,200 bps
(“0” : S/W OFF, “1” : S/W ON)
7~8 N.C (No Connection) Reserved for Future Using Reserved for Future Using
7-3 Memory Switches
The following settings other than the DIP switch can be changed by software. These
settings become effective after the power is turned on or initialization is executed by a
command.
No. Function Default Content to be set Range to be set
Msw 10
Character code table
section
n=0 Page 0 is selected
0-5, 16-19,
254, 255
Msw 11
International character set
selection
n=0 U.S.A is selected 0-13
Msw 12 Brightness adjustment n=4 100% 1-4
Msw 13
Selection of the
peripheral devices
n=2 Display is selected 1-3
Msw 14 Cursor display Selected Selected 0, 1, 48, 49