BIXOLON SPP-R400 - Manual (Page 18)

Rev. 1.02 - 18 -
SPP-R400
3-5 Using Case, Protective Case (Optional)
1) Open its top cover.
2) Insert your printer into the case as shown
in the figure on the left.
3) Close the Velcro.
4) Attach the printer to the belt using the clip
on the back of the case.
5) Open the paper discharger when using
the printer as shown in the figure.
Note
The clip of the case can be rotated in two steps
of 30° for each step (up to 60°)
Belt