BIXOLON SRP-770II - Manual (Page 25)

Rev. 1.19 - 25 -
SRP-770II/770IIE
7. Appendix
7-1 Specifications
Item Description
Printer
Printing Method Direct Thermal Printing
Dot Density 203 dpi (8 dot/mm)
Printing Width 104 mm
Printing Speed 127 mm/sec
Paper
Roll 42~ 106mm
Fan-Fold Type 45 ~ 112 mm
AC
Adapter
SMPS Input Voltage AC 100~240V
Frequency 50/60 Hz
SMPS Output Voltage DC 24V
Usage
Conditions
Temperature
0 ~ 40 ℃ (Operating)
-20 ~ 60 ℃ (Storage)
Humidity
(except for paper)
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
※ Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is indooruse and all the communication hiring are limited to inside of
the building.
- The switch is the disconnecting device. Turn off switch from any hazard.