Denon AVR-5700 - Manual (Page 27)

27
2
3
Press the ENTER button.
The “Auto Preset Memory” screen appears.
Use the CURSOR button to select “Yes”.
“Search” flashes on the screen and searching begins.
“Completed” appears once searching is completed.
The display automatically switches to screen.
ENTER
After completing system setup
1 At the System Setup Menu, press the SYSTEM SETUP button.
2
The changed settings are entered and the on-screen display turns off.
TITLE
SYSTEM
SETUP
This button can be pressed at any time during the system setup process to complete the process.
1
2
3
4
Signals input to the AVR-5700
VIDEO signal input jack (yellow)
E
A
E
A
S-video signal input jack
E
E
A
A
On-screen display signal output
( A : Signal E : No signal)
( A : On-screen signals output E : On-screen signals not output)
• On-screen display signals
VIDEO MONITOR OUT-1 video
signal output jack (yellow)
A
A
E
E
S-video MONITOR OUT-1 video
signal output jack
A
E
A
A
NOTES:
• The on-screen display signals are not output from the video signal MONITOR OUT-2 (yellow) or S-Video signal MONITOR OUT-2 jacks.
• The on-screen display signals are not output from the color difference (component) video signal MONITOR OUT jacks.
• For 4 above, the on-screen display signals are output to the VIDEO MONITOR OUT-1 video signal output jack (yellow) if the monitor TV is
not connected to the S-video MONITOR OUT-1 video signal output jack.
2
This completes system setup. Once these settings are made, there is no need to change them unless different AV components are
connected or the speakers are repositioned.