AXING SPL 2-00 - Manual (Page 11)

Operation Instructions SPL 2-00/-01
Chapter 3: Powerline Network Security
26.11.12 © AXING AG • Reserving change in design and type - We cannot be held liable for printing errors
11
7.
To add more powerline devices to your network, press the Security/Reset button on
device (shown below) for more than 5 seconds until the power light flashes on C.
8. Then repeat steps 4 and 5 in this section using any powerline device or you have
connected using Security/Reset and the powerline device you want to connect. You
must use the Security/Reset button on both devices.
9.
If you disconnected your computer or modem (or any other networking product
connected to your powerline device) in step 1 of this section, you can now
reconnect them.
This sets up your powerline network between your powerline devices.
Security/Reset button
press 1 second
Adding More
Powerline Adapters to
Your Network