AXING SKS 4-00 - Manual (Page 6)

Assembly
SKS 4-00/4-01/8-01
© AXING AG – state of the art: June 2011 – Reserving change in design and type Page 6
3 Assembly
Heat accumulation affects the life cycle of all electric devices and is a source of hazard.
Heat is generated in the casing of the channel processing. It must be possible to let it escape. Therefore,
the ventilation slots in the top and bottom of the casing must not be covered. The channel processing may
only be used in horizontal position.
If more SKS 4-00/8-00 are put next to or on top of each other, minimum distances of >30 cm must be kept
in all directions.
When installing a SKS 4-01 in 19“ cabinets, make sure the ambient and operating temperatures (-10 to
+50°C) inside the cabinet do not fall below or exceed the limits.
Fig. 3: Assembly information
Please note that the channel processing is not exposed to dripping nor splash water. The channel
processing may only be used indoors.