Atlona AT PA100 G2a4 User Manual

Page 5

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Back Panel

1. Locking 24V Port: Connect included locking power supply here.
2. 3.5mm variable audio loop out: Loop out to another AT-PA100-G2 or audio amplifier
with a 3.5mm stereo audio connector
3. Captive Screw Audio: Connect to speakers

Note:

In a cascading chain, the AT-PA100-G2s will share the source of the

AT-PA100-G2.

Note:

When using the loop out, the output is variable and dependant on the volume level.

If cascading, the

AT-PA100-G2’s volume will change with the

AT-PA100-G2.

Note:

The volume status is available through RS-232 feedback from the first AT-PA100-G2.

Note:

When

cascading,

the

MIC

only

available

for

the first AT-PA100-G2’s

speaker output.

1. Input Selection Button: Toggle between the RCA input and 3.5mm audio input
2. Audio Control Button: Adjust the volume of the MIC, Line, or the level of Bass and
Treble with this button
3. Volume adjustment buttons: Use the up and down arrows to turn the volume up or
down or adjust the level of the Bass and Treble
4. Mute button: Use to mute the Line volume

Top Panel